| Northwind Bridge Lamp #5 for Carolyn | |
|
Click on pictures to enlarge
All premium Brass Components shown - will have hand-applied antique finish 59-1/2" tall Unassembled Kit $489.00 plus shipping & insurance (2 packages)
|
|
| Northwind Bridge Lamp #4 - SOLD | |
58" tall, cast metal base with leaf column, cross-cut crystal ball in center, 3/4" embossed ivy tubing, deluxe pull chain uno-threaded socket, all antique brass finish $379.00 plus $40 shipping and insurance, unassembled, shipped in two separate boxes Royal Loop Sugar Shade sold separately for $225
|
|
| Northwind Bridge Lamp #3 SOLD | |
|
click
on pictures to enlarge
$249 (not including shade, which is $49) SOLD
|
|
|
Northwind Bridge Lamp#2 |
|
| click
on pictures to enlarge
|
|
(Antique Base Sold) |
|
| Antique Square Base: Vintage base (unknown metal content - brass or bronze) New reproductions of original antique pattern components as follows: "North Wind" brass bridge arm, new brass Husk Holder for glass shade (not required if using standard Uno-threaded lampshade); Brass Swivel; 3/4-inch "Rope" brass tubing, and turned solid brass seating rings. All these components have hand-applied antique finish, except base - it has original finish. Genuine Onyx 5" Cylinder in center; 5" Genuine Onyx Flat Round break at bottom Cast metal with antiqued finish "Genie Bottle" Column Includes a 12-foot or 16-foot UL approved cord (brown, black, white, gold, or silver) Socket: Deluxe Brass 3-way Turn-knob (as used here) antique finish. (This style socket is usually used when glass shades are used.) For a fabric or styrene shade, you might want a Deluxe antique brass finish Pull-Chain, in which case you would not need the Husk Holder. A uno-fitter shade will thread onto the end of the threaded socket.) All sockets we sell are UL listed and approved. This configuration stands approximately 63" tall. Lamp has a 54" long center pipe (1/4 IP), and the North Wind bridge arm is 8-1/2" tall. There is approximately 1 inch between the floor and where the pipe screws into the base. Height of the lamp is determined by the length of the center pipe, available in one-inch increments from 42" to 60".
|
|
| Northwind Bridge Lamp #1 (Sold) | |
| click
on pictures to enlarge
|
|
 |
 |
 |
|
|
Antique Square Base: Brass-plated Iron, with antiqued finish New reproductions of original antique pattern components as follows: "North Wind" brass bridge arm, new brass Husk Holder for glass shade (not required if using standard Uno-threaded lampshade); Brass Swivel; 3/4-inch "Ivy" Embossed brass tubing, and turned solid brass seating rings. All these components have hand-applied antique finish. Genuine Onyx Donut in center; 5" Genuine Onyx Flat Round break at bottom Cast metal with antiqued finish "Leaf" Column Includes a 12-foot or 16-foot UL approved cord (brown, black, white, gold, or silver) Socket: Deluxe Brass 3-way Turn-knob (as used here) antique finish. (This style socket is usually used when glass shades are used.) For a fabric or styrene shade, you might want a Deluxe antique brass finish Pull-Chain, in which case you would not need the Husk Holder. A uno-fitter shade will thread onto the end of the threaded socket.) All sockets we sell are UL listed and approved. This configuration stands approximately 63" tall. Lamp has a 54" long center pipe (1/4 IP), and the North Wind bridge arm is 8-1/2" tall. There is approximately 1 inch between the floor and where the pipe screws into the base. Height of the lamp is determined by the length of the center pipe, available in one-inch increments from 42" to 60".
|
|
|
To see interchangeable parts for different configuration possibilities, check these links: |
|
